+49 69 83008980 service@xqueue.com
Benötigen Sie Hilfe?

Im Maileon Help-Center finden Sie umfassende Dokumentationen zu unserem System.

Beliebte Suchanfragen: Importe | Rest-API | Integrationen | SMS

Test Lists (UI2)

Sie sind hier:

Test Lists (UI2)

Test lists have a similar structure in the UI2 editor. Find it in Audiences → Segments & Lists → Lists → Test Lists tab (fig. 1). Create a new test list by clicking Add test list.

fig. 1: Click ‘Add test list’ in ‘Audiences’ → ‘Segments & Lists’ → ‘Lists’ → ‘Test Lists’ in UI2.

fig. 1: Click ‘Add test list’ in ‘Audiences’ → ‘Segments & Lists’ → ‘Lists’ → ‘Test Lists’ in UI2.

Add a name and select the contact filter by clicking + Select contact filter (fig. 2).

Note: When using this list, the maximum number of contacts is limited to 2500. The contacts are randomly selected.

fig. 2: Add a name and select the contact filter for the new test list.

fig. 2: Add a name and select the contact filter for the new test list.

Once you have selected the contact filter, click Apply (fig. 3).

fig. 3: Click ‘Apply’ after you have selected the contact filter.

fig. 3: Click ‘Apply’ after you have selected the contact filter.

Note: It is not possible to create a contact filter at this step in UI2.

As the final step, click Save to create the list (fig. 4).

fig. 4: Click ‘Save’ to finish the process.

fig. 4: Click ‘Save’ to finish the process.

The test list is now complete (fig. 5).

fig. 5: The test list is completed.

fig. 5: The test list is completed.

To use the test lists, go to Campaigns → Emails → Triggered Emails, open the emailing to be sent to the test list and click Checks tab (fig. 6).

fig. 6: Open the emailing in ‘Campaings’ → ‘Trigger Emails’ and go to ‘Checks’.

fig. 6: Open the emailing in ‘Campaings’ → ‘Trigger Emails’ and go to ‘Checks’.

Locate the Test sendout option and click Start check (fig. 7).

fig. 7: Click ‘Start check’ under ‘Test sendout’.

fig. 7: Click ‘Start check’ under ‘Test sendout’.

Select the relevant list and click Start (fig. 8).

fig. 8: Click ‘Start’ after selecting the relevant list.

fig. 8: Click ‘Start’ after selecting the relevant list.

The system highlights the completed test and the dispatch date in green. Click on the graphic icon of the statistics to view it and access the resend option (fig. 9, fig. 10).

fig. 9: Click the graphic icon to view the results and access the resend option.

fig. 9: Click the graphic icon to view the results and access the resend option.

fig. 10: The completed test and dispatch date are highlighted in green. To create a new test, click ‘+ New test sendout’.

fig. 10: The completed test and dispatch date are highlighted in green. To create a new test, click ‘+ New test sendout’.

Inhaltsverzeichnis